Thursday, August 25, 2011

2funny Diy Gadget Pranks!!

Have you ever encountered an interest in a new product or Idea that caught your attention, so much that you bought it anyway without really knowing how it worked. Well, that's me! sorta ! I mean I'm more interested in how it works than what it was intended for. However, I understand that everyone has different interests. That's why I created this post. It's a little of both worlds gadgets and how well they work combined into entertainment. Relax kick your feet up and enjoy!

PS.If you are a DIYer, Check out my DIY projects for some cheap novelty and gift ideas!

I was given 20 pill containers of all sizes to see how many gadgets I could come up with. So, with a desk, a small light, soldering iron, some switches and motors I began my journey. Some of my earlier posts are some of these gadgets like the USB desk lite, Diy Allspice Seasoner, Hand shake pill prank and Jitters Creepers. This post are some of the other creations that are included in my journey. I'm sure you will enjoy the clips as much as I have enjoyed making them.

This gadget looks like an ordinary pill container. And that is exactly what it looks like to the pranks tee. I designed it so that the prankster has very little effort pulling off this prank. Armed for excitement, once the cap is lifted the creepy spider appears to be spinning a web for its victims. One glimpse at this and the container is history!! Click the below video to see two adorable kids desperately trying to remove the  cap of the container. Rewarded by their efforts, this is totally not what they want to see.

You've guessed right if your guessing at all. That's right its another episode of gadget pranks.
I love making gadgets. And when I'm not making them I'm using them. In fact, I have more
gadgets to post on my blog for you guys. Between juggling projects  making videos and arranging
pranks I consider myself pretty busy. So stay tuned to see whats next between the juggling. In 
this episode there is a cashier thats pretty cool. I've been wanting to prank her for some time.
In fact I've got most of her co workers, which will be a later episodes so you dont want to miss them.
Click on the video below to see the results of this prank.

Designing a prank successfully depends on how original the prank looks to the victim. In this video I will show you how originality plays a major role in pulling of a successful prank. Later, enjoy the prank that takes place in a cosmetology parlor. Unsure of what lurks inside of this pill bottle one of the employees quickly runs for
cover by asking a co-worker for assistance click on the video below to view this clip of laughter.

Monday, August 15, 2011

DIY "jitters Creepers" Cool kids Projects

Review this gadget

   For this project you'll need the following items:

1) 2 identical plastic pill containers
2) Translucent hollow ball which you can find inside of a large roll on deodorant dispenser
3) Spring from a ball point pen
4) Lighter
5) Velcro (color of your choice I'm using black) or critter of your own ?
6) Hole puncher
7) Scissors

Using your Dremel cutting tool, cut the hollow ball in half. There should be an linear marking on the ball
where the ball was fused together from 2 halves. You can use this marking as a guide to cut the ball in 2 even

Next, make sure that your half sphere is slightly smaller than your pill container. Use the bottom of your container to check the measurement

 Using your dremel cutting tool cut the bottom off of your pill bottle container. Always take your time on your
projects to maximize the effectiveness and to perfect craftsmanship. You will always appreciate your work and other will see and compliment the craftsmanship if your not rushing through it. Your projects will also perform the way you intended them to.

Using your lighter heat up one side of your spring. When the spring becomes hot (orange in color ) push it into
the middle of the hollowed sphere. I'm using needle nose pliers to hold the spring however, the wire is so small that it really doesn't transfer heat to the other side as you would think. As shown below


 Now heat up the other side of the spring and stick it into the top of the pill bottle container. But before you do hold the spring in your fingertips and make sure it tremors if not stretch the spring just a little until it does.

Using your Velcro design a face on your hollow sphere. I used the hole puncher which was helpful to create the nose and eyes. Be creative as you want. You can also use plastic bugs and spiders whichever you

When you have created the "critter" that your satisfied with, place it inside of the pill bottle that you originally
cut the bottom off. Push it all the way, close to the top, just enough so that its able to shake without being interrupted by the sides of the bottle.

When you have the face positioned in place use your fingers and pinch the side of the container to hold the cap in place while using the soldering iron to tack the inserted cap inside of the container. As shown below.

After tacking you should reinforce the position of your tack with superglue. The translucent sphere gives the appearance that the face is floating in the container. These are cool giveaways to trick or treaters or just to put a smile on the " get well soon" patient.  The added effect is in your hands.